1. Contact
  2. Delivery
  3. Testimonials
basket-icon

My Cart

Items: 
Value: 

BasketCheckout
 

CategoriesShow

Ford Model A | Steering Parts |  Steering Box 7 Tooth

Model A Ford

Steering Box 7 Tooth

7 Tooth Model A Ford steering box

7 Tooth Model A Ford steering box

Steering Damper Kit A-3283

Steering Damper Kit A-3283

 Steering Stabilizer kit for the Model T and Model A.

One end clamps on the tie rod, and the end mounts to the front axle. You do not have to drill a hole through the axle to mount this unit. This unit dampens the steering and gets rid of that nasty shimmy.
Instructions Included.

Made in USA.

View instruction sheet

Availability:  2 In Stock!


Price: £187.50  (£225.00 Incl. vat)


More information...

1928-29 Lower Bearing Assembly A-3551-B

1928-29 Lower Bearing Assembly A-3551-B

 Lower Bearing Assembly for the 7 tooth steering column.

The bushing is not included and must be ordered separately.

Availability:  1 In Stock!


Price: £123.00  (£147.60 Incl. vat)


More information...

1928-29 Steering Lower Bearing Bush A-3776-C

1928-29 Steering Lower Bearing Bush A-3776-C

 Standard Steering Lower bearing bushing 1928-29.

This bushing presses into the lower bearing assembly of the 7 tooth steering box.

Made in USA.

Availability:  2 In Stock!


Price: £29.50  (£35.40 Incl. vat)


More information...

1928-29 Oversize Lower Bearing Bush A-3776-CO

1928-29 Oversize Lower Bearing Bush A-3776-CO

 1928-29 Oversize Lower Bearing Bush.

If your steering shaft is worn, you can turn it down slightly and use this oversize bushing.

Made in USA.

Availability:  2 In Stock!


Price: £29.50  (£35.40 Incl. vat)


More information...

1928-29 Steering Box Gasket Set A-3581-AS

1928-29 Steering Box Gasket Set A-3581-AS

 1928-29 Model A Ford Steering box Gasket set.

A complete set of gaskets for the 7 tooth steering box.

Made in USA.

Availability:  4 In Stock!


Price: £8.50  (£10.20 Incl. vat)


More information...

1928-29 Sector Thrust Washer A-3579-AR

1928-29 Sector Thrust Washer A-3579-AR

 Sector thrust washer 1928-29. Cast as original with the grooves.

Goes between the gear end of the sector shaft and the steering box. 7-tooth only.

Made in USA.

Availability:  1 In Stock!


Price: £27.00  (£32.40 Incl. vat)


More information...

1928-29 Sector Thrust Screw A-3577-R

1928-29 Sector Thrust Screw A-3577-R

 Sector thrust screw 1928-29. Used on the 7-tooth steering boxes to adjust the end play on the sector shaft. Made in USA.

Availability:  2 In Stock!


Price: £7.50  (£9.00 Incl. vat)


More information...

1928-31 Sector Bushing Driver A-3576-TBR

1928-31 Sector Bushing Driver A-3576-TBR

 Use this handy tool to help remove and install the sector bushings in both 7 and 2 tooth steering boxes.

Made in USA

Availability:  1 In Stock!


Price: £28.00  (£33.60 Incl. vat)


More information...

1928-31 Sector Bushing Set A-3576-C

1928-31 Sector Bushing Set A-3576-C

 Sector bushings for the 1928-31 Model A Ford.

These bushings go in the housing where the sector goes through. Set of 2.

Made in USA.

Availability:  8 In Stock!


Price: £8.50  (£10.20 Incl. vat)


More information...

1928-29 7 Tooth Sector A-3575-B

1928-29 7 Tooth Sector A-3575-B

 7-tooth sector for the 1928-29 left hand drive model A Ford.

A quality US made sector that is made to the Ford print. Exact copy!

Availability:  3 In Stock!


Price: £187.00  (£224.40 Incl. vat)


More information...

1928-29 Right Hand Drive Sector Shaft A-3575-BRH

1928-29 Right Hand Drive Sector Shaft A-3575-BRH

 Right hand drive sector shaft 1928-29. Special sector for the right hand drive model A with the 7-tooth steering box.

Availability:  2 In Stock!


Price: £172.00  (£206.40 Incl. vat)


More information...

1928-31 Steering Sector Needle Bearing Set A-3574

1928-31 Steering Sector Needle Bearing Set A-3574

 This set replaces the bushings in the sector housing and will make the car steer much easier. Requires machining.

Bore each end of your sector gear housing 1 1/8" deep and 1.375" in diameter.
If installing the optional oil seal (A-3574-SEAL) then bore frame end hole to 1 3/8" deep. Put needle bearing in each end.

Adding the A-3574-SEAL will give the best performance to stop oil leakage.

Made in USA

Availability:  9 In Stock!


Price: £34.50  (£41.40 Incl. vat)


More information...

1928-29 Steering Sector Seal A-3573-7BR

1928-29 Steering Sector Seal A-3573-7BR

 These are for the early Model A Ford with the 7 tooth steering box.

To install seal for the 7 tooth, bore the end of the sector that bolts to the frame .150 deep and 1.375 diameter.

Press in Neoprene seal to stop the oil from dripping out of the sector.

This seal is an after market improvement.

Availability:  3 In Stock!


Price: £12.50  (£15.00 Incl. vat)


More information...

1928-31 Steering Sector O Ring Style Seal Kit A-3573

1928-31 Steering Sector O Ring Style Seal Kit A-3573

 Steering Sector 'O' Ring for the 2 tooth and 7 tooth steering box.

You can slide 'O' ring on end of sector, before you mount steering to frame.

Or to do a proper job, the sector outer bushing should be pressed in a further 3/32" to accept 1/8" 'O' ring. This will minimize leakage of lubricant.

Included is a flat washer installed after the 'O' ring to hold it in place.

Made in USA

Availability:  7 In Stock!


Price: £4.50  (£5.40 Incl. vat)


More information...

1928-48 Kingpin Bearing or Worm Bearing A-3123

1928-48 Kingpin Bearing or Worm Bearing A-3123

 1928-48 Spindle Bearing.

Also used as the steering box Worm bearing on the early Model A 7 tooth steering box.

Two of these bearings are needed for the steering worm. (7 tooth sector)

Made in USA.

Availability:  3 In Stock!


Price: £7.50  (£9.00 Incl. vat)


More information...

1928-29 Steering Column Bottom Felt A-3570-R

1928-29 Steering Column Bottom Felt A-3570-R

 1928-29 Bottom Felt Seal for the 7 tooth steering column.

Made in U.S.A.

Availability:  5 In Stock!


Price: £2.00  (£2.40 Incl. vat)


More information...

1928-29 Steering Box Lower Shim Set A-3559

1928-29 Steering Box Lower Shim Set A-3559

 1928-29 Steering Lower Shim Set for the 7 tooth steering box.

A set of 5 shims. 3 x .008 thick, 1 x .002 thick, 1 x .003 thick.

Availability:  4 In Stock!


Price: £22.50  (£27.00 Incl. vat)


More information...

1928-29 Steering Gear Housing Bush A-3553-AR

1928-29 Steering Gear Housing Bush A-3553-AR

 Steering gear housing bushing 1928-29. Made of bearing bronze for long life.

This is used in the 7-tooth steering boxes only.

Made in USA.

Availability:  4 In Stock!


Price: £34.50  (£41.40 Incl. vat)


More information...

1928-31 Steering Box Mounting Kit A-3547-MB

1928-31 Steering Box Mounting Kit A-3547-MB

 Steering box Mounting bolt kit for the 1928-31 Model A.

This kit bolts the LHD steering box to the front chassis rail.

Made in USA

Availability:  3 In Stock!


Price: £18.50  (£22.20 Incl. vat)


More information...

1928-30 Steering Box Plug A-3538-A

1928-30 Steering Box Plug A-3538-A

 Steering box oil filler plug for the earlier 1928-30 Model A with the 7 tooth steering.

This is the oil fill plug for the top of the steering box. These early boxes had a grease nipple originally, but this was confusing, as the steering has 600w oil and not grease. 1/8" thread.

Made in USA.

Availability:  3 In Stock!


Price: £2.50  (£3.00 Incl. vat)


More information...

1928-29 Steering Oil Seal Retainer With Tube A-3527-T

1928-29 Steering Oil Seal Retainer With Tube A-3527-T

 Same as A-3527-BR except this has a tube welded to it to keep oil from leaking out the bottom of the steering box.


Note, these will not fit in all steering columns. Measure the ID of your steering shaft where this fits before you purchase it. The tube on this part measures .437/.438." The ID of your steering shaft has to be larger than this or it will not work.

Made in U.S.A.

Availability:  2 In Stock!


Price: £25.50  (£30.60 Incl. vat)


More information...

1928-29 Steering Oil Seal Retainer A-3527-BR

1928-29 Steering Oil Seal Retainer A-3527-BR

 Steering Oil seal retainer 1928-29. Threaded plug that holds seal in place at the bottom of the 7-tooth box. Made in USA.

Availability:  2 In Stock!


Price: £17.00  (£20.40 Incl. vat)


More information...

1928-29 Steering Shaft With Worm A-3524-BR

1928-29 Steering Shaft With Worm A-3524-BR

 This new shaft is 44 1/2" long with a brand new seven tooth LHD worm installed.

The steering wheel end of the shaft is splined for the 1928-29 style wheel.

Left hand drive only.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £375.00  (£450.00 Incl. vat)


More information...

1928-29 RHD Worm Gear A-3524-ARX

1928-29 RHD Worm Gear A-3524-ARX

 Right hand drive worm gear for the 1928-29 Model A Ford.

Special cut worm gear for the right hand drive model A with the 7-tooth steering box.

Availability:  3 In Stock!


Price: £139.50  (£167.40 Incl. vat)


More information...

1928-29 LHD 7-Tooth Steering Worm A-3524-A

1928-29 LHD 7-Tooth Steering Worm A-3524-A

 7-tooth steering worm for the 1928-29 left hand drive model A Ford.

This is for the early 7-tooth steering box. US made to the ford print. And exact copy that fits properly.

Availability:  4 In Stock!


Price: £88.50  (£106.20 Incl. vat)


More information...

1928-31 Steering Column Anti-Rattle Strip A-3521

1928-31 Steering Column Anti-Rattle Strip A-3521

 Steering column anti-rattler for 1928-31 Model A.

The rubber strip that goes around the steering column and held in place with the column clamp.

(Canal also be used under our indicator switch clamp).

Made in USA

Availability:  7 In Stock!


Price: £2.50  (£3.00 Incl. vat)


More information...

1928-31 Steering Column Clamp Set A-3519-BR

1928-31 Steering Column Clamp Set A-3519-BR

 1928-31 Steering Column Clamp set. Holds the steering column on the inside of the car.

This is new tooling and comes complete with mounting screws and washers.

Availability:  2 In Stock!


Price: £29.50  (£35.40 Incl. vat)


More information...

1928-31 Steering Column Clamp Bolt Set A-3519-BT

1928-31 Steering Column Clamp Bolt Set A-3519-BT

 Steering column clamp bolts 1928-31.

This is the special screws and washers for holding the column clamp in place.

Set of 2.

Availability:  4 In Stock!


Price: £5.00  (£6.00 Incl. vat)


More information...

1928-29 Steering Upper Bushing A-3517-A

1928-29 Steering Upper Bushing A-3517-A

 1928-29 Steering Upper bushing. Bushing is predrilled and tapped and includes two 10/32 screws for the 1928 to May 1930 columns.

Only one hole is drilled and tapped. The second hole on the steering tube was never in the same location. Soak wick in oil before installing. Originally this was nickel-plated.

Made in USA

Availability:  3 In Stock!


Price: £20.00  (£24.00 Incl. vat)


More information...

1928-29 Steering Upper Bush Screw Set A-3517-MB

1928-29 Steering Upper Bush Screw Set A-3517-MB

 Steering Upper bushing screws 1928-29. 2 screws to hold the upper steering column bushing in place. These were on the 28-9 7 tooth box. Made in USA.

Availability:  4 In Stock!


Price: £1.50  (£1.80 Incl. vat)


More information...

1928-31 Steering Clamp Bolt Kit A-3507-MB

1928-31 Steering Clamp Bolt Kit A-3507-MB

 Steering Clamp bolts 1928-31.

Kit mounts the steering shaft housing to the steering box through the clamp. Made in USA.

Availability:  5 In Stock!


Price: £2.50  (£3.00 Incl. vat)


More information...

1928-31 Standard Pitman Arm A-3590

1928-31 Standard Pitman Arm A-3590

 Standard length pitman arm for the 1928-31 left hand drive model A Ford.

This is a very well made FORGED steering arm. Original length (6 3/4" centres).

Availability:  2 In Stock!


Price: £58.00  (£69.60 Incl. vat)


More information...

1928-31 Shorter Pitman Arm LHD A-3590-S

1928-31 Shorter Pitman Arm LHD A-3590-S

 Ease that heavy steering with this new pitman arm 1 1/2" shorter than a standard Model A Pitman Arm.

Henry Ford discovered in 1933 that a pitman arm 1 1/2" shorter, gave reduced steering effort and therefore made the change on all production cars from that point. Now you can have the benefit of this without the worry of cutting and welding an original arm. Made of SAE4130 chrome moly steel. (5 1/4" centres).

Nore: Your steering needs to be correctly adjusted and any worn parts rectified before feeling the benefit of the shorter pitman arm.
LEFT HAND DRIVE ONLY.

Availability:  5 In Stock!


Price: £71.50  (£85.80 Incl. vat)


More information...

1928-31 Pitman Arm Bolt A-3590-MB

1928-31 Pitman Arm Bolt A-3590-MB

 Pitman arm bolt 1928-31.

Special bolt used to attach the pitman arm to the sector shaft on the steering box.

Made in USA.

Availability:  4 In Stock!


Price: £7.50  (£9.00 Incl. vat)


More information...

1928-34 Weld in Ball Stud A-3311-W

1928-34 Weld in Ball Stud A-3311-W

 Weld in Ball stud 1928-34. If your steering balls are worn, it is best to replace them.

Worn balls will create quite a drag on the steering! With this style of ball, you simply cut off the old ball, drill the hole, slide the new ball stud in place, and weld!

4 of these are required for a Model A. Ball diameter 1" Shank 1/2".

Made in USA.

Availability:  11 In Stock!


Price: £11.50  (£13.80 Incl. vat)


More information...

600W Transmission Oil - 5 Litre

600W Transmission Oil - 5 Litre

 5 litres of 600W transmission oil.

This is the thick oil that is used in the back axle, gearbox and the steering box on the Model A Ford.

***UK MAINLAND DELIVERY ONLY*** We cannot ship oil to Europe!

Availability:  3 In Stock!


Price: £53.50  (£64.20 Incl. vat)


More information...

Ford Model A | Steering Parts |  Steering Box 7 Tooth

Recently Viewed


Customer Services

Website Information

Address

Telephone 01530 839902

Email: sales@oneillvintageford.co.uk
O'Neill Vintage Ford
5 Stephenson Court, Brindley Road,
Coalville, Leicestershire, LE67 3HG.

© 2007 - 2025 O'Neill Vintage Ford